Basic connections (continued), En - 12, Projector + computer – MITSUBISHI ELECTRIC XD480U User Manual

Page 12: For macintosh, About ddc

Advertising
background image

EN - 12

Projector + Computer

For computer with Mini D-SUB

• The signal inputted to the COMPUTER/COMPONENT VIDEO DVI-D (HDCP) IN-2 terminal is not outputted from the

COMPUTER OUT terminal.

• Make sure to connect computer with DVI cable before starting computer. If connecting computer with DVI cable

after starting the computer, the image signal may not be outputted from DVI terminal of computer.

• Plug the power cord of the projector in the wall outlet fi rst, and then boot up the computer.
• When DVI is selected as the input source, setting of SIGNAL menu (except SHUTTER) is unavailable.
Important:
• When you use a longer RGB cable instead of the provided cable, the image may not be projected correctly.
• Some computers require additional connectors or analog RGB output adapters to be connected with this projector.

Contact your dealer for further information.

• This projector uses stereo pin jack for its audio input. Check the type of the audio output terminal of the connected

computer and prepare a proper cable for connection. Some computers don't have the audio output terminal.

• Speaker output is mono.
• When the audio cable is connected to the AUDIO OUT terminal, the speaker output is muted.

For Macintosh

• If your Macintosh has no video port, a monitor output adapter is required. Contact your dealer for further information.
• Some Macintoshes require a MAC adapter for the RGB cable for connection with this projector. Contact your dealer

for further information.

About DDC

The COMPUTER/COMPONENT VIDEO IN-1 terminal of this projector complies with the DDC1/2B standard and the
COMPUTER/COMPONENT VIDEO DVI-D (HDCP) IN-2 terminal complies with the DDC2B standard. When a computer
supporting this standard is connected to this terminal, the computer will automatically load the information from this
projector and prepare for output of appropriate images.
• After connecting a computer supporting this standard to this terminal, plug the power cord of the projector in the

wall outlet fi rst, and then boot up the computer.

• You may need to install the DDC driver, depending on the computer you use. In this case, you need to download

the driver from our Web site. Contact your dealer or Mitsubishi sales offi ce for further information.

AUDIO OUT

MONITOR OUTPUT

COMPUTER/COMPONENT
VIDEO IN-1/2

AUDIO IN

AUDIO OUT

MONITOR OUT

RGB cable for PC

Computer

to monitor

port

PC audio cable (option)

to PC audio

output

RGB cable for PC (option)

Necessary when outputting to both a PC monitor and the projector.

AUDIO OUT

DVI

COMPUTER/COMPONENT
VIDEO DVI-D (HDCP) IN-2

AUDIO IN

DVI cable

Computer

to DVI port

PC audio cable (option)

to PC audio

output

For computer with DVI terminal (For XD480U / XD450U only)

Basic connections (continued)

Audio cable

(option)

Advertising
This manual is related to the following products: