Maytag MLI7500AAW - Manual (Page 7)

6
SETTING THE TEMPERATURE
1. Place the iron on the
cradle.
2. Press the steam
button down.
3. Press the
temperature control
button until the desired temperature
indicator light is flashing.
• The temperature setting cannot be
changed unless the iron is on the
cradle.
• Refer to the Fabric Guide (shown
below) to select proper temperature
setting.
• Irons heat up more quickly than they
cool down, so start with lower
temperature settings and gradually
increase as needed.
• When ironing fabric blends, select a
temperature setting for the fabric
component that requires the lowest
temperature.
• When ironing fabrics that are
especially susceptible to heat, first
“test the fabric” by ironing in an
inconspicuous area of the fabric.
Utilize a pressing cloth as needed.
• Be sure to read garment care labels
since using improper temperature
settings could damage fabrics.
Settings
Choose the appropriate setting to suit the
fabric.
Fabric Guide
Setting Synthetics Wool/Silk Linen/Cotton
Acrylic Silk Linen
Acetate Wool Cotton
Fabric Type
Nylon Rayon
Velvet
Polyester
Temperature Low Medium High
Note: When ironing velvet, use steam but do not let the iron touch the fabric.
Test an inconspicuous area first before proceeding.
• The steam range is indicated for higher
temperature settings.
• When steam-ironing fabrics that require
lower temperature steam than is available
with the lowest steam setting, a pressing
cloth suitable for use with the particular
steam setting should be placed on top of
the fabric.
Press
Wait until the
selected light
begins to flash.