Motorola MC1000 - Manual (Page 23)

Getting Started 1 - 11
Handstrap
Install the optional handstrap on either the right or left tether point. To install the handstrap:
1. Insert the handstrap clip into the slot at the bottom of the mobile computer.
Figure 1-13 Insert Handstrap Clip
2. Press the mobile computer down to force the handstrap clip into place.
Figure 1-14 Press Mobile Computer Down
3. Thread the handstrap loop through the tether point.
Figure 1-15 Insert Loop into Tether Point
4. Slip the Velcro end of the handstrap through the loop and pull taught.
Handstrap Clip
Handstrap Loop