MicroNet Technology EtherFast 100Mbps Fiber-Optic Adapter SP2515 SERIES - Manual (Page 7)

<Cable Connection> test reminds you that the connection link
might be fail, either the cable is not connected or the cable link
fails.
For the <Run Diagnostics on Network> test, it is necessary to
connect your computer with its supporting hub or another
computer. This is a "Ping-Pong" test. This test cannot be
completed except two computers on the LAN for sending or
receiving the test packets between computers.
For the <Run Diagnostics On Network> test
2.7 Specifications 2.7 Specifications 2.7 Specifications 2.7 Specifications
Standards IEEE 802.3u 100BASE-FX
PCI Specifications Revision 2.1
Speed 200Mbps full-duplex
100Mbps half-duplex
Performance 148,800pps for 100Mbps
Fiber Cable 62/125µm multi-mode fiber-optic
cable, up to 2 km
Wavelength 1300nm
LED Indicators LNK (Link) /ACT (Activity)
Dimensions 136 mm × 89 mm
Net Weight 90g approx.
Power Consumption 5VDC, 500mA max.
Operating Temperature 0°C to 40° C (32°F to 104°F)
Storage Temperature -25°C to 70°C (-13°F to 158°F)
Humidity 10%-90% non-condensing
Network
Ethernet Address
00E07DC00002
Target Machine
Ethernet Address
00E07DC00001
Master Machine