Marmitek 20095 - Manual (Page 8)

8 MARMITEK
4.3 Installing the receiver
Attention: Because of technical reasons, you need to place the TV Anywhere
transmitter and receiver together when installing the system. After finishing the
installation you can move the receiver to wherever you wish to connect your TV.
During the installation the receiver needs to be connected to a (random) TV.
1. Connect the RCA cable to the A/V output on the TV Anywhere receiver [2]. Take care to
match the color of the plugs with the color code on the jacks of the receiver.
2. Connect the cable to your television set, using the Scart adapter marked "Receiver" if
connected to the Scart input.
3. Select the corresponding channel [3] with your transmitter (set both units to e.g. "C").
4. Connect the small power adapter (9V) to the TV Anywhere receiver [4].
5. Switch on the unit with the ON/OFF switch [5].
6. Direct the flat 2.4 GHz antenna [K] at the transmitter.
☺
To receive the signals from your TV Anywhere, switch the TV connected to your TV
Anywhere receiver (remote TV) on to the A/V channel (on some TV’s use channel "0"). If
connected and if no channel is programmed on your TV Anywhere a blue screen will
appear.
5. 6in1 Remote Control – TV Anywhere functionality
1. Open the battery compartment on the back of the remote.
2. Insert 2 batteries (AAA size, not included). Note the correct polarity/position.
3. Close the battery compartment.
TV Anywhere function keys on your 6in1 Remote:
PROG+ Next Channel
PROG- Previous Channel
0-9 Channel selection
PREV.CH Return to previous selected channel
ENT Confirm your choice during setup
CATV/AV Switch between the TV Anywhere internal tuner or external connected
A/V equipment (e.g. DVD player)
COPY Copy a TV channel in the list
PASTE Move a copied TV channel to a new position in the list
DISP On screen channel display of the TV Anywhere channel set
SCAN Automatic search for channels (6).
FINE TUNE - Fine tune a TV channel
FINE TUNE+ Fine tune a TV channel
CHAN DELETE Delete TV Anywhere channels. To delete a stored TV Anywhere channel,
select the channel and then press CHAN DELETE.