MGE UPS Systems ESV 11+Rack - Manual (Page 21)

MGE UPS SYSTEMS Pulsar ESV 8+Rack/11+Rack/14+Rack/22+Rack : 86-153523-00 21
technical data
■ output power:
■ ■ Pulsar ESV 8+ Rack: 780VA/490W ■ ■ Pulsar ESV 14+ Rack: 1400VA/980W
■ ■ Pulsar ESV 11+ Rack 1080VA/700W ■ ■ Pulsar ESV 22+ Rack: 2200VA/1540W
■ utility power source:
■ ■ voltage (V): 92V to 138V single phase (*)
■ ■ frequency (F): 47Hz to 53Hz or 57Hz to 63Hz
■ battery: Pulsar ESV 8+ Rack: 2 x 12V - 7.2Ah
■ ■ type: Pulsar ESV 11+ Rack: 3 x 12V - 7.2Ah
Pulsar ESV 14+ Rack: 4 x 12V - 7.2Ah
Pulsar ESV 22+ Rack: 8 x 6V - 12Ah
maintenance free sealed lead-acid
caution: battery life (4 or 5 years) is halved every 10°C above 25°C
■ output specifications with load on battery:
■ ■ voltage (V): single phase 120V ±5% (**)
■ ■ frequency (F): 50Hz/60Hz ± .1Hz auto selection
■ output specifications with load on utility power:
■ ■ voltage (V): see "normal operation with utility power present"
■ ■ frequency (F): 47Hz to 53Hz or 57Hz to 63Hz
■ environment:
■ ■ noise level: ≤ 40dBA for operation on utility power
≤
45dBA for battery backup time
■ ■ operating temperature: 0 to 35°C
■ ■ relative humidity: 0 to 90% non condensing
■ dimensions and weights: Pulsar ESV 8+ Rack / 11+Rack / 14+Rack Pulsar ESV 22+ Rack
■ ■ height H (mm/inch): 133.35/5.25 177.8/7
■ ■ width W (mm/inch): 482.6/19 482.6/19
■ ■ depth D (mm/inch): 457.2/18 457.2/18
■ ■ weight (kg/lb) : 25/29/31 (kg) 55/64/68 (lbs) 44/97
(*): adjustable high and low thresholds using ESV Driver (CD-ROM: EMB/ESVPLUS/CONFIG)
(**): can be adjusted from 100 to 127V using ESV Driver (CD-ROM: EMB/ESVPLUS/CONFIG)