Moyer Diebel MD1000HT - Manual (Page 15)

9
_______________ Installation Guide
;
Chemical Dispensers MD-1000HT
1. The MD-1000HT high temperature dishwasher sanitizes with 180-195° F/82-91° C
hot final rinse water.
2. Do not connect a sanitizer chemical dispenser to the MD-1000HT.
3. You may wish to contact a chemical supplier to supply the chemical dispensers
and chemicals for liquid detergent and liquid rinse-aid. (Consult your local listings).
4. The chemical supplier must adjust their dispensers to provide the proper dosages
for the installed dispensing system.
5. The factory may have supplied the chemical dispensing system as an option. Your
chemical supplier must adjust factory dispensers for the chemicals supplied also.
6. The factory recommends that the chemical injectors be installed in the right
front corner of the wash tank as shown below.
Note:
Manual dosing of detergent or rinse-aid is NOT RECOMMENDED for the MD-1000HT
dishwasher. Poor washing results may result if manual dosing is employed..
Note:
Cartridge detergent systems are NOT RECOMMENDED for the MD-1000HT
dishwasher. Poor washing results may result if installed on this model.
Continued on page 10
Recommended
locations
for chemical injectors
for dispensing
systems
supplied by others.
MD-1000HT • Chemical Dispensers
○ ○ ○ ○ ○ ○ Factory installed injection points