Miele W 4840 - Manual (Page 24)

8. Start the program
^ Press the flashing "Start" button.
If a delay start is set, the remaining
times elapses in the display. Once the
delayed start time has elapsed or
immediately after the program starts,
the approximate program running time
is displayed. The washer calculates the
water absorbency of the laundry in the
first 8 minutes. The overall program
time may be shortened or lengthened.
Additionally the sequence cycle is
displayed. The washer shows the
current program step.
The drum door will be locked and the
drum light will turn off once the program
starts.
,
If a program was started without
detergent, cancel the program first.
Add detergent, then select and start
a program again.
9. Activate the Child Lock
(if desired)
The Child Lock prevents a program
from being canceled.
^ Press and hold the "Heavy Soil"
button until the display shows:
X
Locked
Deactivate the Child Lock
^ Press and hold the "Heavy Soil"
button until the display shows:
W
Ready to use
Once the program has finished, the
Child Lock must be deactivated.
Using the washer
24