MITSUBISHI ELECTRIC Mitsubishi Electric LCD HC6800 - Manual (Page 8)

EN-8
Remote control
ON ( I ) button 1
HDMI2 button 2
HDMI1 button 3
COMPONENT button 4
AV MEMORY buttons 5
ENTER button 6
MENU button 7
CONTRAST button* 8
BRIGHTNESS button* 9
GAMMA button* 10
ZOOM/FOCUS button 11
LENS SHIFT button 12
NOISE REDUCTION button* 13
COLOR button* 14
SHARPNESS button* 15
COLOR TEMP. button* 16
ASPECT button 17
AUTO IRIS button 18
p 19 , q, t, u buttons
VIDEO button 20
S-VIDEO button 21
COMPUTER button 22
AUTO POSITION button 23
OFF ( 24 ) button
* : See below for the picture quality adjusting buttons.
Adjustment feet 1
Bottom side
Using the picture quality adjusting buttons
When you press any of the picture quality adjusting buttons, the screen for adjusting the picture quality appears.
Adjust the picture quality by pressing the t and u buttons. The picture quality adjustment can be made alternatively
in the IMAGE menu. (See page 26.) Items in the menus are shown in parentheses below.
CONTRAST (CONTRAST) ................ Adjusts the contrast of the projected image.
BRIGHTNESS (BRIGHTNESS) ......... Adjusts the brightness of the projected image.
COLOR TEMP. (COLOR TEMP.) ....... Selects one of the preset color temperatures. Adjustment of USER mode is also
available. (See page 32.)
GAMMA (GAMMA MODE) ................ Selects one of the preset gamma mode. Adjustment of USER mode is also
available. (See page 33.)
SHARPNESS (SHARPNESS) ............ Adjusts the sharpness of the projected image.
COLOR (COLOR) .............................. Adjusts the color thickness of the projected image.
NOISE REDUCTION (TRNR, MNR, BAR) ... Adjusts the TRNR, MNR and BAR of the projected image. (See page 33.)
Preparing your projector (continued)
1
19
20
17
14
13
12
18
16
22
23
24
21
15
1
2
3
4
5
6
7
8
9
10
11
Important:
When you press any button on the remote control, the buttons on the remote control are lit. Wait approx. 6 seconds
after releasing the button to turn them off.