Marantz MA-9S1 - Manual (Page 15)

12
ብ Level meter
This meter is used to check the output power.
Meter indication vs Output power
Indicated level (dB) 8 ΩLoad(W) 4 ΩLoad(W)
0 300 600
–10 30 60
–20 3 6
–30 0.3 0.6
–40 0.03 0.06
ቦ Meter off switch
This switch is used to turn on/off the level meter and the internal
light of the level meter.
5. Name and function
Front panel
ቢ Power switch
Press the power switch to turn the power on/off. When the
power is on, the power indicator 3 will be illuminated.
ባ Input selector
This knob is to select the input source from the Pre-Amp.
ቤ Power indicator
The power indicator is illuminated while the power switch is
on.
Rear panel
ቧ ATT (Attenuator)
The knob is to attenuate the input level.
Initial set up is 0dB.
ቨ Balanced input terminal
Connect to the Balanced output terminal of the Pre-Amp.
ቩ Unbalanced input terminal 1, 2
Connect to the Unbalanced output terminal of the Pre-Amp.
ቪ Speaker output terminal
Connect your speaker system to these terminals.
Speaker cable wiring
→ p.5
ቫ AC IN socket
Connect to a household power outlet.