Connecting to other equipment – Meridian America DSP8000 User Manual
Page 16
12
Setting up
the DSP8000
loudspeakers
Connecting to other equipment
To connect two DSP8000 loudspeakers to a Meridian product with SpeakerLink
MERIDIAN
SPEAKERLINK
DSP8000 loudspeaker – Slave
Meridian 808.2 CD Player
DSP8000 loudspeaker – Master
RJ45 lead
RJ45 lead
MERIDIAN
SPEAKERLINK
MERIDIAN
COMMS
DIGITAL
INPUT OUTPUT
INPUT OUTPUT
INPUT OUTPUT
MERIDIAN
SPEAKERLINK
MERIDIAN
COMMS
DIGITAL
INPUT OUTPUT
INPUT OUTPUT
INPUT OUTPUT
You can create a complete system by connecting a pair
of DSP loudspeakers directly to a digital source. The
speakers include volume, balance, and tone controls
allowing you to control the system using the MSR+.
If the Meridian source or control unit includes a
Meridian SpeakerLink output, such as the Meridian
808.2 CD Player, you can make all the connections
using SpeakerLink (RJ45) cables.
Connect the MERIDIAN SPEAKERLINK OUTPUT
from the Meridian source or control unit to the
MERIDIAN SPEAKERLINK INPUT on the DSP
loudspeaker chosen as master, using an RJ45 lead.
•
Connect the MERIDIAN SPEAKERLINK OUTPUT
from the master DSP loudspeaker to the MERIDIAN
SPEAKERLINK INPUT on the other (slave) DSP
loudspeaker, using an RJ45 lead.
Configure the slave DSP8000 as S.RJ45; see
To
choose master or slave and the primary connector,
page 24.
•
•