Mace CAM91 - Manual (Page 8)

Installation Method
14
Day&Night Color CCD Camera
15
Day&Night Color CCD Camera
Installation Method
The lens is not supplied with this camera. Purchase a lens suitable for your
environment.
This camera accepts the auto iris lens and both C- and CS-mount lens.
1. Remove the cover from the iris lens plug supplied, and solder the lens cable to
the plug as shown below.
2. Attach the lens to the camera by turning clockwise.
3. Connect the lens plug to the auto iris connector on the right side of the camera.
4. Set the DC / VIDEO selection switch to DC or VIDEO according to the type of the
lens.
Pin No.
No.1 Pin
No.2 Pin
No.3 Pin
No.4 Pin
Video type
Power(Red)
N.C
Video signal(White)
GND(Black)
DC type
Damping-
Damping+
Drive+
Drive-
Lens
Installing Auto Iris Lens
Cover Lens cable
No.3 Pin
No.1 Pin
No.4 Pin
No.2 Pin