Metabo Hammer - Manual (Page 11)

72 |
KHE 32 CODE!
KHE 56
Comparative device characteristics
Torque
25 Nm
Drilling capacity in
- Concrete with hammer drill bits 32 mm
- Concrete with router bits
- Concrete with TCT bits
- Masonry with TCT bits 80 mm
No load speed 0 - 780 /min
Rated input power 900 W
Output power 480 W
Rated load speed 780 /min
Maximum impact rate 3.800 /min
Maximum single-blow energy 3,5 J
Collar diameter 50 mm
Bit retainer SDS-plus
Weight (without mains cable) 3,5 kg
Standard equipment Hammer chuck for tools with
SDS-plus shank end, quick-
action keyless chuck for tools
with cylindrical shank end,
rubber-coated side handle,
drilling depth guide, carry case
Type KHE 32
Order no. 6.00332
EQUIPMENT FEATURES
Suitable for bits and accessories with SDS-plus shank end
With the appropriate accessories, it is also suitable for bits
and accessories with cylindrical shank end (no impact)
Hammer stop
Rotation stop
Metabo CODE! System: electronic anti-theft system,
activated by CODE! key (accessory)
Clockwise and anticlockwise rotation
Metabo "Quick" chuck change
Vario Tacho Constamatic (VTC) full-wave electronics
Robust Metabo Marathon motor
Pneumatic high-performance hammer mechanism
Die cast aluminium gear housing
Rubber-coated handle
Torque limiting clutch
Auto-stop carbon brushes
Brush wear indicator
Electronic Combination Hammer
KHE 32
COMBINATION HAMMERS
Comparative device characteristics
Torque
90 Nm
Drilling capacity in
- Concrete with hammer drill bits 45 mm
- Concrete with router bits 65 mm
- Concrete with TCT bits 100 mm
- Masonry with TCT bits
No load speed 0 - 450 /min
Rated input power 1.300 W
Output power 650 W
Maximum impact rate 2.840 /min
Maximum single-blow energy 14 J
Collar diameter 66 mm
Bit retainer SDS-max
Weight (without mains cable) 6,7 kg
Standard equipment Metabo VibraTech (MVT) side
handle, drilling depth guide,
lubricant for tool shank end,
duster, carry case
Type KHE 56
Order no. 6.00340
EQUIPMENT FEATURES
Suitable for bits and accessories with SDS-max shank end
With the appropriate accessories, it is also suitable for bits
and accessories with spline shank or ratio thread
Metabo VibraTech (MVT): reduced vibration levels and
therefore less impact on joints due to the integrated
damping system on the handles
Additional handle can be fitted to three places on the housing
Optional 30% impact reduction setting for working with
more pliant materials
Rotation stop
Vario Tacho Constamatic (VTC) full-wave electronics
Electronic soft start for precise spot-drilling
Pneumatic high-performance hammer mechanism
Magnesium die cast gear housing
Torque limiting clutch
Stoppable switch for trouble-free chiselling in continuous
operation
Chisel can be fixed in 12 positions
Auto-stop carbon brushes
The service display, for example, indicates when the
carbon brush needs to be replaced, plus an LED indicating
mains voltage
Electronic Combination Hammer
KHE 56
... with the
Metabo CODE!
The electronic
security system
protects against
theft and unaut-
horised use.
NEW