Metabo WS 7400 - Manual (Page 11)

11
ENGLISH
This angle should be maintained
during the entire cutoff operation.
5. Cut the work piece, exerting only
light pressure on the cutoff wheel.
Note the direction of the flying
sparks!
A
Danger!
Always disconnect tool from air sup-
ply before servicing.
Repair and maintenance work other
than described in this section must
only be carried out by qualified spe-
cialists.
•
Check all screwed connections for
tightness, tighten if necessary.
•
If the tool is not lubricated by a serv-
ice unit or line oiler, add for every 15
operating minutes (continuous oper-
ation) 3-5 drops of pneumatic oil into
the air inlet.
•
Do not store tool unprotected out-
doors or in damp environment.
•
Pneumatic oil 0.5 litre
Special lubricant for air tools, serv-
ice units and line oilers.
Stock-no. 090 100 8540
•
Add-on lubricator R1/4" female
Installs directly on air tool. Oil level
can always be checked through
sight glass.
Stock-no. 090 105 4584
•
Swivel-type air inlet
DKG 1/4"
For fitting directly to air tools.
Improves tool manoeuverability.
Stock-no. 090 106 0991
A
Danger!
Repairs to air tools must be carried
out by qualified specialists only!
Air tools in need of repair can be sent to
the service centre in your country. See
spare parts list for address.
Please attach a description of the fault to
the air tool.
The tool's packaging can be 100 % recy-
cled.
Worn out machines and accessories
contain considerable amounts of valua-
ble raw and plastic materials, which can
be recycled.
These instructions are printed on paper
produced with elemental chlorine free
bleaching process.
5. Care and Maintenance
6. Available Accessories
7. Repairs
8. Environmental Protection
9. Technical Specifications
Model WS 7400
Air consumption l/min 400
Max. permissible working pressure bar 6.3
Speed min
-1
11000
Orbital stroke mm 5
Sanding pad diameter mm
"
125
5
Spindle thread M14
Vibration (effective value of weighted acceleration) m/s
2
0.6
Sound power level L
WA
Sound pressure level L
PA
dB (A)
dB (A) 90
78
Dimensions:
length x width x height
mm 230 x 108 x 148
Weight: Tool without packaging
Tool with packaging kg
kg 1.8
2.74