Charging the battery – Memorex Clip and Play MMP8000 Series User Manual
Page 8
7
CHARGING THE BATTERY
This unit has a built-in Li-Polymer rechargeable battery. When the bars in
the battery indicator (in the display) become low (see Figure 1), recharge
the battery as follows.
1. Connect the USB cable to the USB jack on the top of this
unit (as shown) and to the USB port on your computer; “✓
OK to Remove” will appear on the screen. When
charging, the battery indicator will cycle from empty to
full. Once the battery is fully charged, the battery indicator
will stop cycling.
NOTES:
• When you disconnect this unit from your computer, this unit will turn on and update the
playlist automatically. It will take several seconds to several minutes to update the
player's library depending on the number of files that you have transferred to the player.
• It takes approx. 1.5 hours to charge the battery from empty to full. When fully charged,
the unit can playback for approx. 12 hours. (Actual playback times may vary.)
• For data transfer, please use the USB cable (included) to connect the unit to
your computer.
Figure 1