MITSUBISHI ELECTRIC PKA-AGAL - Manual (Page 6)

6
Note:
The day and time will not appear if clock use has been disabled at Function
Selection of remote controller.
Day of the Week &
Time display
˚F
˚F
TIME SUN
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION CLEAR
TEST
TEMP.
MENU
BACK DAY MONITOR/SET
CLOCK
ON/OFF 2 4
9
¡
q
1. Press the or Set Time button q to show display ™.
2. Press the Timer On/Off (Set Day) button 9 to set the day.
* Each press advances the day shown at £: Sun → Mon → ... → Fri →
Sat.
3. Press the appropriate Set Time button q as necessary to set the time.
* As you hold the button down, the time (at ¢) will increment first in
minute intervals, then in ten-minute intervals, and then in one-hour in-
tervals.
4. After making the appropriate settings at Steps 2 and 3, press the Filter
button 4 to lock in the values.
Time Setting
TIME SUN
™
£
¢
Day of the Week Setting
4. Setting the Day of the Week and Time
˚F ˚F
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION CLEAR
TEST
TEMP.
MENU
BACK DAY MONITOR/SET
CLOCK
ON/OFF 2
7
™
£
3
8
§
¢
∞
•
¶
¡
1
5
6
Mode
Temperature setting
Fan speed
Airflow up/down
Remote Controller settings
Last operation mode
Last set temperature
Last set fan speed
COOL or DRY
Mode HEAT
FAN
Horiz. outlet *
Last setting
Horiz. outlet *
™
∞
§
1
2 6
5
3
£
¶
7
5.1. Turning ON/OFF
<To Start Operation>
■ Press the ON/OFF button 1.
• The ON lamp ¡ and the display area come on.
Note:
● When the unit is restarted, initial settings are as follows.
<Screen Types>
For details on setting the language for the remote controller display, refer
to section 8. Function Selection.
The initial language setting is English.
● Function Selection of remote controller:
Set the functions and ranges available to the re-
mote controller (timer functions, operating restric-
tions, etc.)
● Set Day/Time: Set the current day of the week or time.
● Standard Control Screens:
View and set the air conditioning system’s oper-
ating status
● Timer Monitor: View the currently set timer (weekly timer, sim-
ple timer, or Auto Off timer)
● Timer Setup: Set the operation of any of the timers (weekly
timer, simple timer, or Auto Off timer).
<How to change the screen>
A :Hold down both the Mode button and the Timer On/Off button for 2
seconds.
B :Press the Timer Menu button.
C :Press the Mode (Return) button.
D :Press either of the Set Time buttons (
or ).
˚F
TIMER
MON
OFF
WEEKLY
SUN MON TUE WED THU FRI SAT
WEEKLY
˚F
˚F
TIME SUN
Function Selection of remote controller Set Day/Time
Standard Control Screens
OFF ON
Timer Monitor Timer Setup
A D C
B C
B
3. Screen Configuration
5. Operation
* It will be set by last setting for wired remote controller.
BG79U794H02_en 05.12.22, 2:02 PM 6