Marantz CDR300 - Manual (Page 11)

- 11 -
Controls, Display (top) continued
POWER
5 Standby POWER switch
Slide the Standby POWER switch
to the right to turn power on or off.
POWER button on rear of unit
must be ON (the red STANDBY
STANDBY
6 STANDBY light
STANDBY light (red) is lit when power
is switched off by the Standby
POWER switch on the unit or remote.
light must be lit).
BASS MID TREBLE
TEXT PHANTOM PROG REPEAT MENU/STORE
DISP SINGLE A-B CANCEL/DELETE REC MODE
ERASE FINALIZE
REC
SELECT
PUSH ENTER
POWER STANDBY
CD RECORDER CDR300 PROFESSIONAL
5 6 7
7 Display
R
L
dB-50 -30 -22 -16 -12 -8 -4 0OVER
1 A B TOTAL TRACK
REPEAT AUTO SYNC
PROGRANDOM DIGITAL
STANDBY
CD-RW
CD TEXT
TOC
1 2 3 4 5 6 7 8
5 PROG indicator
Lit during programming mode (selecting
track playback sequence).
PROG
6 REPEAT indicator
Lit during a repeat operation.
When the 1 indicator is also lit only the
currently playing track is repeated.
REPEAT
REPEAT
1
DIGITAL
7 DIGITAL indicator
Lit during digital recording. Not lit during
playback.
R
L
dB-50 -30 -22 -16 -12 -8 -4 0OVER
8 Level meter
Displays the level of the Left and Right channels of
audio from the music source. During CD playback this
is the audio level of the CDR drive. During recording
this is the audio level of all music sources feeding the
CDR drive.
CD
CD-R
CD-RW
10 TEXT indicator
TEXT is displayed when the CD being
9 CD indicator
Displays CD, CD-R, or CD-RW telling
you the type of disc that is in the CDR
drive.
TEXT
played includes CD TEXT information. Or when TEXT
mode is selected to enter CD TEXT information onto a
CD you are recording.
A-B 11 A-B indicator
A- is lit after pushing the A-B button once
indicating that the beginning of audio segment to be
repeated has been selected. REPEAT is also lit. A-B
is lit after pushing the A-B button a second time. The
audio segment from A to B is repeated indefinitely.
9
TOC
information is held in memory. The table of contents
includes the total number of tracks, playback time and
other CD text if provided. Flashes during recording.
1 TOC
Lit when TOC (disc table of contents)
2 Record indicator
Lit when recording.
3 Pause indicator
Lit when recording or playback has been
paused.
4 Play indicator
Lit during recording or playback.
10 11 12
TOTAL TRACK is lit when the display information (time
to end) applies to the whole CD rather than the track
being played.
TOTAL TRACK 12 TOTAL TRACK indicator
TRACK is lit when the display information (time to end)
applies to the track being played rather than the whole
CD.