Before operation – MITSUBISHI ELECTRIC CP9600DW-S User Manual
Page 15
12
PRECAUTIONS
4
4
4
4
4
Install the print paper into the unit.
Make sure to install the print paper firmly.
NOTE
Install the print paper into the unit slowly. If it is dropped along the ditches, the unit or
accessories may be damaged.
Roller
Print paper
5
5
5
5
5
Remove the sticker, insert the print paper between the rollers as
shown right, and feed the print paper until it reaches the black
cover.
•
Remove the sticker before inserting the print paper between rollers. Make sure to
insert the paper straight.
NOTE
•
Keep the roller clean. Dirt on the roller may degrade the print quality.
NOTE
•
When taking the print paper out, pull it up toward you.
•
Make sure to turn on the power before replacing the print paper.
•
Make sure to eliminate any slack from the print paper. If you carry out the following
steps without eliminating the slack, the print paper may be damaged.
Black cover
2
2
2
2
2
Press the POWER button to turn on the power.
3
3
3
3
3
Press the DOOR OPEN button to open the door.
Take the ink cassette in the printer out.
Direction of paper
insertion
BEFORE OPERATION