Memorex MD6885 - Manual (Page 15)

14
CD OPERATION (CONTINUED)
With a CD inserted, press the
PLAY/PAUSE (
)/POWER ON
button ❶ to turn the unit on and press
the STOP (■)/POWER OFF button ❷ to
stop auto playback. Press the PROG.
button ❸ ; the PROG indicator will
appear in the CD display.
!
1
Select the first track to be played back
using the
SKIP/SEARCH – ❶ or +
button ❷ , then press the PROG.
button ❸ again. Repeat this step to
program additional tracks up to a
maximum of 24 tracks.
!
2
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
Press the PLAY/PAUSE ( )
/POWER ON button ❶ to begin
Program playback and adjust the
VOLUME control ❷ and DBBS switch
❸
as desired.
!
3
To skip forward or backward through
the programs, press the
SKIP/SEARCH
– ❶ or + button ❷ . When the
disc is through playing, it will stop.
4
NOTES:
•
Press the STOP (■)/POWER OFF button to stop the disc before it is finished.
• As each program is played, the track number is shown in the display.
• To clear the memorized program: press the STOP (■)/POWER OFF button
again while in the stop mode, wait approximately 60 seconds and the unit will turn
off or open the CD compartment.
• Programming is the ability to preselect the order in which a series of tracks
will be played.
• Each track may be stored in the program memory as many times as desired
(up to 24 tracks).
MD6885.O/M.QXD 1/15/02 10:07 PM Page 14