Gas connection – Miele T9820 User Manual
Page 16
Advertising
,
To secure all connections use
appropriate Teflon tape or a thread
compound.
Use a 10" slip joint wrench only.
^ At the end of the dryer's gas
connection hand screw on the
3
/
8
" NPT elbow.
Using a wrench tighten the elbow
with a half turn.
^ Secure the gas connection with
Teflon tape or thread compound.
^ Install a
3
/
8
" flare union adapter, a , to
the female elbow, b .
Hold the elbow with a wrench.
The maximum amount off orce used
should be 531 lbfi n. (60 Nm).
^ Secure the flexible metal gas line
connector to the adapter.
Gas connection
16
Advertising