Motion Computing F5 - Manual (Page 12)

6 Chapter 1 Getting Started
Setting up the system
The tablet is self-contained, so you can start using it immediately. If you are using a
Docking Station, refer to the instructions that came with the docking station. Use the
following steps to get started.
For safety information, see the Safety and Regulatory Guide packaged with the system.
Step 1: Plug in the power adapter
• Plug the power cord into the power adapter and the tablet, then plug the power cord
into an outlet.
Note: You should keep the system plugged in until the battery is fully charged.
Battery latch Opens the battery compartment’s door.
Hot-swap logo Indicates you can hot swap the battery (page 36).
Docking guide Aligns the unit with the Docking Station.
Smart card reader
(optional) Reads and writes information on a smart card that is inserted
into the reader (page 17).