MITSUBISHI ELECTRIC P91DW - Manual (Page 16)

13
8
ADJUSTMENT OF PRINT PICTURE
Selection of Gamma (
γ
) Curve
γ−
curve set
mode
You can select
γ
-curve by pressing the gamma button " ".
Each time the button is pressed, the indicator and
γ
-curve
number is switched. After a
γ
-curve number has been
selected, press the "SET" button to store the
γ
-curve number.
This is the mode to select the gamma (
γ
) curve (density
diagram characteristic) to get the proper density for each
printing image. Select the best one among the five gamma
curves.
Adjustable contents Indicator/Adjustable Item
FUNC DOWN SET UP
GAMMA FEED