MGE UPS Systems EPS 7000 - Manual (Page 32)

EPS 7000 Shared Systems
page 2 —4 Operation
2.4 Voltage Measurements
To display voltage measurements, press the “V” key on the keyboard. See Figure 2-4.
Figure 2-4: Voltage Measurement Displays.
Select voltage measurements by
pressing the
◊
pushbutton
INPUT VAB VBC VCA
V RMS
BYPASS VAN VBN VCN
V RMS
BYPASS VAB VBC VCA
V RMS
INV. VAN VBN VCN
V RMS
INV. VAB VBC VCA
V RMS
LOAD VAN VBN VCN
V RMS
LOAD VAB VBC VCA
V RMS
◊
◊
◊
◊
◊
◊
◊
◊
Main input (mains 1) phase-to-phase voltages
in VAC RMS.
Bypass input (mains 2) phase-to-neutral
voltages in VAC RMS.
Bypass input (mains 2) phase-to- phase
voltages in VAC RMS.
Inverter output phase-to-neutral voltages in
VAC RMS.
Inverter output phase-to-phase voltages in
VAC RMS.
Load phase-to-neutral voltages in VAC RMS.
Load phase-to-phase voltages in VAC RMS.
(Only in UPS modules)
(only in SSC)
(only in SSC)
(only in UPS modules)
(only in UPS modules)