MITSUBISHI ELECTRIC PD-6150 - Manual (Page 37)

28
ORBITER MENU
Use this to set menu shift.
Example: Setting “ORBITER MENU” to “OFF”
Follow the instructions given in the “Reducing Burn-in
of the screen” section.
Bring up the LONGLIFE menu.
Use the
▲ ▼ buttons to select ORBITER MENU setting.
Use the ᮤ ᮣ buttons to turn the ORBITER MENU on or off.
SEL. ADJ. EXIT RETURN
L O N G L I F E
P E A K B R I G H T
O R B I T E R
I N V E R S E / W H I T E
S O F T F O C U S
O R B I T E R M E N U
M E N U C O N T R A S T : 1 0 0 %
: O F F
: O F F
: O F F
: O F F
: L OW
Information
Ⅵ ORBITER MENU settings
ON: The position of the menu will be shifted by eight
dots each time the menu is displayed.
OFF: The menu will be displayed at the same position.
MENU CONTRAST
Use this to reduce the brightness of the menu.
Example: Setting “MENU CONTRAST” to “NORMAL”
Follow the instructions given in the “Reducing Burn-in
of the screen” section.
Bring up the LONGLIFE menu.
Use the
▲ ▼ buttons to select MENU CONTRAST
setting.
Use the
ᮤ ᮣ buttons to change the MENU CONTRAST
setting.
SEL. ADJ. EXIT RETURN
L O N G L I F E
P E A K B R I G H T
O R B I T E R
I N V E R S E / W H I T E
S O F T F O C U S
O R B I T E R M E N U
M E N U C O N T R A S T : 1 0 0 %
: O F F
: O F F
: O F F
: O N
: N O R M A L
Information
Ⅵ MENU CONTRAST settings
NORMAL: Menu brightness is set to normal.
LOW: Menu brightness is set to lower.
Signal Information Menu
Checking the frequencies, polarities of input
signals, and resolution
Use this function to check the frequencies and polarities
of the signals currently being input from a computer, etc.
On “MAIN MENU”, select “SIGNAL INFO.”, then press
the MENU/ENTER button.
The “SIGNAL INFORMATION” is displayed.
SEL. ADJ. EXIT RETURN
S I G N A L I N F O R M AT I O N
H . F R E QU E N C Y
V. F R E QU E N C Y
H . P O L A R I T Y
V. P O L A R I T Y
M E M O RY
R E S O L U T I O N
: 4 8 . 4 K H z
: 6 0 . 0 H z
: N E G AT I V E
: N E G AT I V E
: 2 4
: 1 0 2 4
؂768
PC: MEMORY will be displayed.
Others: MODE will be displayed.