Metrologic Instruments MS2421 - Manual (Page 28)

24
I NSTALLATION
EAS D EACTIVATION
SW1 and SW2 are the switch banks inside the Checkpoint device that set the deactivation range. The following is a list of
Checkpoint recommended switch bank settings.
Base Model Checkpoint Recommended Switch Bank Settings
MS2421 SW1 & SW2 switches 1 and 6 set to ON
MS2422 SW1 & SW2 switches 1 and 6 set to ON
All MS2421/MS2422 models have a connector labeled EAS In on the bottom of the unit. Metrologic has an optional EAS cable
(
MLPN 52-52511 x) available for purchase for connection between the Checkpoint device and the MS2421/MS2422 scanner.
Figure 23. EAS Cable Connection (Bottom of MS2421/MS2422)
The following figure shows the location of the EAS deactivation area for the MS2421/MS2422 scanner. It is important to pass
the entire tag through this area to deactivate the security tag.
Figure 24. EAS Deactivation Area