Meridian America F80 - Manual (Page 39)

34
Setting up the F80
The SETUP menus allow you to configure your F80 to suit
your preferences.
To display the SETUP menus press , Adjust,
Setup.
Radio
The RADIO SETUP menu allows you to
choose which antenna is used for each band,
and choose which bands are active.
To set up the antennas
The F80 provides a choice of two antennas,
Ant.1 and Ant. 2.
Ant. 1 is usually connected to an external
rod or wire antenna via the connector on the
back panel.
Ant. 2 can be switched between the internal
antenna, and a second external antenna.
DAB Ant. AM Ant. Ant. 2 FM Ant. ¬ )
SETUP RADIO ANTENNAS
1 Internal 2 (Int) 2 (Int)
Press DAB Ant., FM Ant., or AM Ant.
to specify the antenna for each band.
Press Ant. 2 to switch Ant. 2 between the
internal antenna, and a second external
antenna. •
•
Examples
To receive DAB and FM in an area with high
signal strength on both bands:
Leave the default settings: Ant. 2 set to
Internal, and DAB Ant. and FM Ant.
set to 2 (Int).
If the internal antenna does not give good
reception:
Connect the rod or wire antenna to the
Ant. 2 socket, set Ant. 2 to External, and
leave DAB Ant., FM Ant., and AM Ant.
set to 2 (Ext).
To choose which radio bands are
active
Press  to display the SETUP RADIO
BANDS menu.
Press DAB, FM, or AM to choose which
bands are active.
•
•
•
•
Aux Info ) Radio Disc ¬
SETUP