McIntosh MS300 - Manual (Page 66)

PAGE 62
MS300 User
’s Manual
SETTING USER PREFERENCES
User preferences are available to specify global configuration options
and preferred system settings. Press the SETUP key on the remote
control to display the Setup Menu. Use the navigation keys on the
remote control (up, down, left, and right) to highlight and select any
menu item.
SETTING THE SCREEN SAVER PREFERENCES
Screen Savers are provided for each source mode. Screen Savers
provide two important functions, to prevent a static image from being
displayed on the video output device for extended periods of time and
to provide useful information to the user when activated.
Follow these steps to set your screen saver preferences:
1. Press the SETUP key on the remote to display the Setup
menu.
2. Select the GENERAL Menu.
3. Select the SCREEN SAVER Menu.
4. Select your Screen Saver Preferences.
Activation Idle Time
You can specify the amount of idle time that the MS300 will wait
before activating the screen saver from 1 to 60 minutes.
Warning: Some televisions and plasma monitors are more susceptible
to screen burn-in than others, therefore, we recommend using a low
activation time (like 1 minute) to reduce the risk of burn-in.
Mode
Select either the Normal mode or Product Demonstration mode. The
Normal mode displays the current title or station information while
the Product Demonstration mode is intended for retail product demos
during idle time.
USER PREFERENCES