Philips Magnavox 251W Series - Manual (Page 45)

45
T his TV can also be used as a PC Monitor. A PC
video signal must be present or the TV will go into
standby mode. The PC Picture controls allow you to
adjust the picture.
Press the MENU button on the remote
control to see the onscreen menu.
When the PICTURE menu is highlighted, Press
the
/ button to enter the
PICTURE menu.
Press the / button to highlight the item that
you would like to adjust.
Brightness: It is disabled in PC mode.
Contrast:Adjust to “s harpen” the Picture
quality. The black portions of the picture
become richer in darkness and the white
become brighter.
Auto
Color Temp:Adjust the color temperature.
Adjust: The LCD Monitor will
automatically adjust to the best image
position, phase, and clock setting.
Manual Adjust: The Manual Ad just control
allow you to manually fine tune the image as it
appears on the screen.
Phase-eliminates the horizontal
interfering lines.
Clock-eliminates the vertical interfering lines.
Horizontal-adjust the horizontal
placement of the picture.
Vertical-adjust the vertical placement of the
picture.
Press MENU repeatedly to remove
the menu from the screen.
1
2
3
4
5
6
Note: Make sure you are in PC mode.
1. To adjust other items repeat steps 3 and 4.
2. Color Temp can also be activated by pressing
Auto Picture button your remote control.
If you are wanting to reset adjustment back to
original value, please enter to Factory Reset in
Install menu.
H
ELPFUL
H
INT
Press the OK button to return to the
previous menu.
CONTRAST
BRIGHTNESS
PHASE
CLOCK
HORIZONTAL
VERTICAL
MOVE SELECT RETURN EXIT OK MENU
COLOR TEMP
AUTO ADJUST
MANUAL ADJUST
NORMAL
1
6
2
5
3
4
Press the / button to adjust the item.
PC P ICTURE C ONTROLS
PICTURE