MicroNet Technology VOIP FXO SP5054A/S - Manual (Page 50)

49
6). According to the result, enter the Freq. into Tone table.
command:
usr/config$ tone 1 480 620 1 1 25 25 1023 1023
【Example-1】
(Make a call from PSTN to FXO port)
usr/config$ record -tone
Press (R) to start record...
(Please make sure that you are already finish the steps 2 ~ 7)
r (Press “Enter” button after you key in “R”)
....................................................................................................
....................................................................................................
....................................................................................................
............
Analizing!! Please wait a moment...
(You coule hang up the call from PSTN if you get this message)
Frequency 1 : 481
Frequency 3 : 621
0.25sec on 0.25sec off
tone 4 481 621 8 8 25 25 1023 1023