MIDLAND XT511 - Manual (Page 13)

®
Model XT511 Series
Page 13 www.midlandradio.com
VOX (Hands-free Transmission)
Your radio has 3 VOX level settings: (oF/1/2/3).
To set VOX, press the MENU button until the display shows “Vo” while on
the right, an “oF” icon appears. Select “1”, “2”, or “3” by turning the
TUNING knob and push the PTT key, or press MENU button again to move
to the next feature setting.
VOX will be more sensitive on the “1” setting than on the “3” setting.
To turn VOX off, press the MENU button until the display shows “Vo” while
on the right, a “1”, “2” or “3” icon appears. Select “oF” by turning the
TUNING knob and push the PTT key, or press MENU button again to move
to the next feature setting.
Note: For VOX Hands-free operation use Midland headset accessories
or built-in internal microphone. The accessory hand mic is not
intended for VOX mode use.
CALL ALERT SELECTION
Your XT511 Series has 5 selectable CALL ALERTS (oF/1~5).
To select, press the MENU button until a “CA” icon appears and to the right
of the “CA” icon the current CALL ALERT setting is displayed. Then turn
the TUNING knob to make the CALL ALERT selections - the radio will emit
a corresponding tone for each selection. To confirm, press the PTT button
or press MENU button to move to the next feature setting.
Note: Setting the CALL Alert to “oF” will disable the CALL Alert
function.
ROGER BEEP (end of transmission) TONE
When the PTT button is released, the radio will beep to confirm to other
users that your transmission has finished.
To turn the ROGER BEEP tone on, press the MENU button until the
display shows an “rb” icon while on the right of the “rb” display, an “oF”
icon appears. Select “on” by turning the TUNING knob and push the PTT
key, or press MENU button to move to the next feature setting. The
ROGER BEEP icon will appear on the display.
To turn the ROGER BEEP tone off, press the MENU button until the
display shows an “rb” icon while on the right of the “rb” display, an “on”
icon appears. Select “oF” by turning the TUNING knob and push the PTT
key, or press MENU button to move to the next feature setting. The
ROGER BEEP icon will disappear on the display.