MGE UPS Systems SNMP 10BT - Manual (Page 6)

Page 6 - 51029486EN/AA
U-Talk
UPS
2. Installation
2.1 Setup
The SNMP communication card may be installed in either:
◗ A UPS (see figure 1).
◗ A MultiSlot module (see figure 2).
The front of the card must be secured to the device frame using the two screws provided. It is not necessary to de-
energise the device before inserting the card.
Figure 1: example of an
installation in a UPS Figure 2: example of an installation in a MultiSlot
module
Position of the jumper for network-parameter selection 6 :
Factory-set network parameters
Personalised network parameters
(default position)
1
2
3 1
2
3
Us/Out/Ausg
I max 3.4A Ue/In/Eing
2
10A/250V
1
U-Talk
MultiSlot
UPS