Multi-Tech Systems MULTIMODEM MT2834ZDX - Manual (Page 28)

Appendix A – Regulatory Compliance
Multi-Tech Systems, Inc. MT2834ZDX User's Guide 28
(e) Certification Numbers granted prior to the implementation of the above marking format are
grandfathered.
(i) For previously certified TE, the self-marking format shall consist of the old certification number preceded
by “IC:” For example, if the certification number is “123 1234 A”, then the self-mark would read “IC: 123
1234 A”.
(ii) For a new model that is registered to a family of previously certified TE, the self-marking format shall be:
IC: XXXXXX-ZZZZZZZZ
Where:
· “XXXXXX” is the Company Number, as in (d) above ; and
· “ZZZZZZZZ” is either the old certification number minus the old company number, or a
new Unique Product Number assigned by the applicant. For example, if a new model is
registered to the family of products with certification number “123 1234 A”, and that the
Company Number for the registration is “123A”, then the self-mark for this new model
would read “IC: 123A-1234 A”. If the applicant decides to replace “1234 A” with a new
UPN, say “5678", then the self-mark would read “IC: 123A-5678".
Industry Canada
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Reglement Canadien sur le matériel
brouilleur.
Multiple Listing
This terminal device may be multiple listed to other distributors based upon the approval granted to the
original certificate holder. In order to obtain a multiple listing certification, the following documentation must
be presented to Industry Canada:
(a) The model number, Industry Canada certificate number and certification number of the approved
equipment;
(b) A letter from the original certificate holder authorizing the Department to use information on file to
grant a multiple listing certification. The name/model number, certificate number and certification
number for the subject equipment must be shown. The letter must also declare that the model to be
multiple listed is identical in design and construction to the originally approved model;
(c) A letter, from the proposed multiple listee, requesting the certification;
(d) A Terminal Equipment Certification / Testing Application and Agreement form, completed by the
proposed multiple listee;
(e) A drawing, sample or illustration of the product label; and
(f) Payment in accordance with TRC-49 section on Multiple Listings.