Mercedes-Benz SLK 320 - Manual (Page 33)

33
Getting started
Adjusting
Power seat*
̈ Switch on the ignition by turning the
key in the steering lock to position 2.
or
̈ Open the driver’s or passenger door.
The seat adjustment switches are located
on the outer sides of the seats.
1 Seat height
2 Seat fore and aft adjustment
3 Seat cushion tilt
4 Backrest tilt
Seat height
̈ Press the switch up or down in the di-
rection of arrow 1.
Seat fore and aft adjustment
̈ Press the switch forward or backward
in the direction of arrow 2.
Adjust to a comfortable seating position
that still allows you to reach the
accelerator/brake pedal safely. The posi-
tion should be as far to the rear as possi-
ble, consistent with ability to properly
operate controls.
Seat cushion tilt
̈ Press the switch up or down in the di-
rection of arrow 3 until your upper
legs are lightly supported.
Backrest tilt
̈ Press the switch forward or backward
in the direction of arrow 4 until your
arms are slightly angled when holding
the steering wheel.
Head restraint height
i
When moving the seat, ensure there
are no items in the footwell or behind
the seats. Otherwise you could damage
the seats.
Warning!
G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that the head re-
straint supports the back of the head at eye
level. This will reduce the potential for injury
to the head and neck in the event of an ac-
cident or similar situation.
Do not drive the vehicle without the seat
head restraints. Head restraints are intend-
ed to help reduce injuries during an acci-
dent.