MTD 330 Series - Manual (Page 15)

15
Model Series 300 & 330
Ref.
No.
Part No. Part Description
1. 734-1988 Wheel 8 x 1.75
734-1781 ‡ Wheel 8 x 1.8
2. 738-0929 Shoulder Screw
3. 686-0081A Wheel Bracket Assembly
4. 714-0149B Cotter Pin
5. 711-0415 Clevis Pin
6. 736-0242 Bell Washer.340 ID x.872 OD
7. 710-0189† Hex Cap Screw 5/16-18 x 3.0
710-0176 ‡ Hex Cap Screw 5/16-18 x 2.75
8. 738-0934 Shoulder Screw
9. 786-0145A Engine Mounting Plate
10. 750-0470 Spacer.47 OD x.96Lg
11. 686-0189† Chain Case Assembly
686-0091 ‡ Chain Case Assembly
12. 712-0429 Hex Lock Nut 5/16-18
13. 736-0171 Lock Washer 7/16
14. 712-0240 Jam Nut 7/16-20
15. 642-0002 ‡ Inner Tine Assembly - RH 12”
642-0003 ‡ Inner Tine Assembly - LH 12”
16. 642-0004 ‡ Outer Tine Assembly -RH 12”
642-0005 ‡ Outer Tine Assembly - LH 12”
17. 710-0502A Hex Washer Screw 3/8-16 x 1.25
18. 712-3010 Hex Nut 5/16-18
19. 736-0242 Bell Washer.340 ID x.872 OD
20. 710-3180 Hex Cap Screw 5/16-18 x 1.75
21. 750-0273† Spacer, .51 x .69 x 1.97
22. 04922† Tine 9.5” RH
23. 04923† Tine 9.5” LH
24. 711-0702† Clevis Pin
25. 04918† Tine Adapter
26. 710-0599† Self-tapping Screw, 1/4-20 x .5
27. 750-0456† Spacer, .790 x .347
Ref.
No.
Part No. Part Description
† Series 300 Only
‡ Series 330 Only