Motorola USBW 100 - Manual (Page 28)

Establishing Wi-Fi Connections
• Click the Profiles button in the main window of the Motorola
Connection Manager software. The Network Profiles window appears.
• Select the network for which you wish to edit the encryption keys.
• Click the Edit button.
• Switch to the WiFi tab.
• Enter the new encryption key in both the Network Key box and the
Confirm Network Key box.
• Click the OK button.
Enabling 802.1x Authentication
The Motorola Connection Manager software allows you to use to
authenticate against your corporate network or other domain. The
Motorola Connection Manager will allow you to use any authentication
method that is installed on your computer. (Please note that authentication
is only available on Windows XP and on Windows Vista.
To enable automatic 802.1x authentication:
1. Create a network profile for the WiFi network that you wish to
authenticate.
2. Open the Network Profile window by clicking the Profiles button.
3. Select the Network Profile you wish to edit.
4. Click the Edit button.
5. Select the WiFi tab.
6. Check the Enable data encryption box.
7. If you selected a WEP method, you will also have to check Enable
802.1x authentication . (If you selected WPA, this box was checked
automatically).
8. From the EAP type dropdown, select the type of authentication you
wish to enable.
USBw 100
MAR 2009 23