Sample 3 - multi-point public frame-relay network, Chapter 9: sample configurations – Marathon MAGNUM ROUTER User Manual
Page 121
Chapter 9: Sample Configurations
___________________________________________________________________
9-16
Sample 3 - Multi-Point Public Frame-Relay Network
IP Address: 192.168.1.2/24
IP Address: 192.168.1.1/24
IP Address: 10.1.100.250/24
CSU/DSU
Magnum/Marathon A
Ethernet port
Network: 10.1.100.0/24
CSU/DSU
Magnum/Marathon B
Ethernet port
Network: 172.16.1.0/24
IP Address: 172.16.1.250/24
Public Frame Relay
DLCI 16
PVC
WAN
Network
192.168.1.0/24
DLCI 17
A1 to M1
cable
IP Address: 192.168.2.2/24
Network: 172.17.1.0/24
Magnum/Marathon C
IP Address: 172.17.1.250/24
Ethernet port
DLCI 18
CSU/DSU
This example is basically the same as the second example, except that a third Magnum Router
is being added. Pay close attention to the WAN IP Route Map screens, WAN Configuration
screens, and Ethernet Configuration Screens. In this example, multiple IP addresses are used
on the WAN Ports, and multiple Virtual DLCI’s are utilized.
Configuration Files used in this example
Multi-Point Public FRAME-A.CF2
Multi-Point Public FRAME-B.CF2
Multi-Point Public FRAME-C.CF2