Insignia NS-LCD19W-09 - Manual (Page 16)

16
Insignia NS-LCD19W-09 19” LCD TV
www.insignia-products.com
Setting the function menu options
To set the function menu options:
1 Press MENU on the remote control. The
on-screen menu appears.
2 Press CH+ or CH- to highlight the Function
icon, then press ENTER to enter the Function
menu.
3 Press CH+ or CH- to highlight your selection,
then press ENTER to go to the sub-menu (if
available). Choices include:
• Language—Sets the language of the
on-screen display (OSD).
• OSD Timeout—Sets the amount of time
that the OSD remains on the screen.
Choices include Short, Long, or Middle.
• OSD Transparency—Sets the
transparency of the OSD. Choices include
Low, High, and Middle. At the low setting
the OSD is opaque.
• Screen Mode—Sets the aspect ratio of
the display. Choices include Full Screen,
Normal, Wide, Zoom, and Cinema.
• Blue Screen—Turns the Blue Screen
option On or Off. With the option on, your
TV screen turns blue after 3 seconds
without an input signal.
• DPMS—Turns the PC Power
Management option On or Off. With the
option on, your TV enters standby mode if
there is no signal for 2 minutes. The TV
comes on automatically when signal input
resumes.
• Time Setup—Opens a sub-menu which
lets you set up the time options.
• Closed Caption—Opens a sub-menu
which lets you set the Closed Captioning
options.
• Default—Opens a dialog box which lets
you choose to reset the TV settings to
factory default.
4 Press VOL+ or VOL- to adjust the setting
(where appropriate).
5 Repeat Steps 3 and 4 to adjust the other
settings.
6 Press EXIT to close the menu and return to
normal viewing.
Setting up the time options
To set up the time options:
1 Press MENU on the remote control. The
on-screen menu appears.
2 Press CH+ or CH- to highlight the Function
icon, then press ENTER to enter the Function
menu.
3 Press CH+ or CH- to highlight Time Setup,
then press ENTER to go to the sub-menu.
The
Time Setup sub-menu opens.
4 Press CH+ or CH- to select an option, then
press ENTER to open the sub-menu
(Date/Time). Choices include:
• Time Zone—Sets the correct time zone
for your area.
• Date/Time—Opens a sub-menu that lets
you set the correct date and time.
• Sleep Timer—Sets the optional sleep
timer. Options include Off, 5 Min, 10 Min,
15 Min, 30 Min, 45 Min, 60 Min, 90 Min,
120 Min, 180 Min, and 240 Min.
5 Press VOL+ or VOL- to change the setting
(where appropriate).
6 Repeat Steps 3 and 4 to adjust the other
settings.
7 Press EXIT to close the menu and return to
normal viewing.