Invacare Lightweight Aluminum Wheelchair - Manual (Page 11)

11 CALL TOLL FREE, 1-888-6AURORA
(628-7672)
QUESTIONS ABOUT THIS PRODUCT?
SAFETY INSPECTION CHECKLIST
SAFETY INSPECTION CHECK LIST
S
A
F
E
T
Y
I
N
S
P
E
C
T
I
O
N
NOTE: Regular cleaning and inspection will reveal loose or worn parts and enhance the smooth operation
of your wheelchair. To operate properly and safely, your wheelchair must be cared for just like any other
vehicle. Routine maintenance will extend the life and efficiency of your wheelchair.
Initial adjustments should be made to suit your personal body structure and preference. Thereafter follow
these maintenance procedures:
ITEM INITIALLY INSPECT/ INSPECT/ INSPECT/
ADJUST ADJUST ADJUST
WEEKLY MONTHLY PERIODICALLY
GENERAL (TROUBLESHOOTING)
1.Wheelchair rolls straight (no excessive drag or pull
to one side). X X
WHEEL LOCKS (PROCEDURE 6)
1.Do not interfere with tires when rolling.
X X
2.Pivot points free of wear and looseness. X X
3.Wheel locks easy to engage. X X
SEAT AND BACK UPHOLSTERY (PROCEDURE 3)
1.Inspect for rips or sagging.
X X
2.Inspect for loose or broken hardware. X X
TIRES (PROCEDURES 4 and 5)
1.Inspect for flat spots and wear.
X X
CAUTION: As with any vehicle, the wheels and
tires should be checked periodically for cracks and
wear, and should be replaced when necessary.
REAR WHEELS (PROCEDURE 4)
1.No excessive side movement or binding when lifted
and spun. X X
HANDRIMS (PROCEDURE 4)
1.Inspect for signs of rough edges or peeling.
X X
SPOKES
1.Inspect for cracked or broken spokes.
X X
FRONT CASTER (PROCEDURE 5)
1.Inspect wheel/fork assembly for proper tension by
spinning caster; caster should come to a gradual stop. X X
2.Loosen/tighten locknut if wheel wobbles noticeably or
binds to a stop. X X
3.Wheel bearings are clean and free of moisture. X X X
CAUTION: As with any vehicle, the wheels and
tires should be checked periodically for cracks and
wear, and should be replaced when necessary.
CLEANING
1.Clean upholstery and armrests.
X X