If installing only new tank, If installing only new faucet – InSinkErator 1100 User Manual

Page 10

Advertising
background image

10

B

■

■

At tank top, depress release ring or gray
release tab into quick-connect fitting
securing blue or copper 1/4" tube and
gently pull line off tank fitting. Pull white
7/16" tube and clear 5/16" tube off fittings.

■

■

If not already equipped, the included
snap-connect fitting must be installed.

■

■

To install snap-connect fitting, unscrew
brass mounting nut and remove snap-
connect fitting, brass ferrule and nut.

A

■

■

Slide brass nut and plastic ferrule
onto the 1/4" blue or copper tube
running from the faucet.

■

■

Insert blue or copper tube into snap-
connect fitting and tighten brass nut
with a wrench, 1 to 2 turns clockwise.

■

■

You may elect to use existing tank
mounting bracket.

■

■

Refer to Page 7, Steps 3-4 for
complete installation instructions.

A

■

■

Determine if your existing tank is A, gray
plastic shell, or B, white metal shell.

■

■

At tank top, depress gray release tab
(if A) or release ring (if B) into quick-
connect fitting securing blue or
copper 1/4" tube and gently pull line
out of fitting. Pull white 7/16" tube
and clear 5/16" tube off fittings.

■

■

Remove existing faucet.

Blue Tube

Property Damage:

Do not over tighten brass nut.

Property Damage:

Turn off water & unplug tank.

Property Damage:

Unplug tank before connecting faucet.

Tank A

■

■

The snap-connect fitting will be
attached directly to the tank.

Tank B

■

■

Cut off snap-connect fitting at the
end of the blue 1/4" tube. Ensure
that cut is straight and burr free.

■

■

Insert blue tube into fitting on tank.

■

■

Skip to Step 2 (pages 7-11) for
complete installation instructions.

Property Damage: Do not pinch or break copper

tubing. Do not distort the last 1 inch of tubing.

IF INSTALLING ONLY NEW TANK

B

Release

Tab

1/4"

blue

7/16"

white

5/16"

clear

Release

Ring

1/4"

blue or

copper

7/16"

white

5/16"

clear

Cut

here

Check

orientation

of ferrule

Make note of

orientation

of ferrule

IF INSTALLING ONLY NEW FAUCET

Tank A

Tank A

Tank B

Tank B

Advertising
This manual is related to the following products: