IBM MX5 - Manual (Page 15)

dialog.
• Press Orange then press numeric dot to delete the currently highlighted
file(name). Or, tap and hold the stylus on the filename and a menu box with
a Delete option appears.
Toggle the Display and Keypad Backlight On and Off
When the keypad backlight option is Enabled in Windows icon | Settings |
System | Backlight tab, both the display and the keypad backlights can be
toggled on and off.
Locate the Blue key at the top of the keypad. Toggle the backlights on and off by
pressing the Blue key, then the Right Scan key.
Increase or Decrease Backlight Intensity
When the backlight is on, press the Orange key and the < 7 > key to decrease
the intensity of the backlight. Repeating this keypress sequence continues to
decrease the intensity of the backlight until the backlight is Off.
Once the backlight is off, use the Blue key and the Right Scan button keypress to
toggle the backlight on. This process returns the backlight to it’s brightest
intensity.
Set the Display Backlight Timer
Note: Refer to the section titled "Power Modes" later in this manual for
information relating to the power states of the MX5.
Tap the Windows icon | Settings | System | Backlight icon. Select an
option and tap OK to save the changes.
Backlight time-out always allowed
Backlight times out whether or not there is keypad or stylus activity. The blue
key and the right scan key sequence toggles the backlights on and off before
and after time-out expires. A key sequence toggle or Suspend / Resume cycle is
the only way to turn the backlights back on after a time-out.
Backlight time-out when no keyboard/pen activity
Backlight times out when there is no keypad or stylus activity. The blue key and
the right scan key sequence toggles the backlights on and off before and after
time-out expires. A key sequence toggle or Suspend / Resume cycle is the only
way to turn the backlights back on after a time-out.
Backlight time-out when no keyboard/pen activity and resume on activity.
Backlight times out when there is no keypad or stylus activity. The blue key and
the right scan key sequence toggles the backlights on and off before and after