IBM MX5 - Manual (Page 20)

Virtual Keyboard
The virtual keyboard is always available. Tap the keyboard icon at the bottom of
the screen to put the virtual keyboard on the display. Using the stylus:
• Tap the 123 key to display either an alphanumeric keyboard or a numeric
keyboard with characters usually accessed by capitalizing alphanumeric keys
on a physical keyboard.
• Tap the Shift key to type one capital letter.
• Tap the CAPS key to type all capital letters.
• Tap the au key to access symbols.
Touch Screen Display
The MX5 Touch Screen Display is an Active Color LCD unit capable of supporting
QVGA graphics modes. Display size is 320 x 240 pixels in portrait orientation. The
display covering is designed to resist stains. The touch screen allows signature
capture and touch input. A pen stylus is included. The touch screen responds to
an actuation force (touch) of 4 oz. of pressure (or greater).
The color display has a CCFL (Cold-Cathode Fluorescent Lighting) front light.
When off, the display appears to have a greenish hue.
Display Backlight
The Display backlight is turned On when the unit returns from Suspend Mode.
The display backlighting feature is programmable and activates based on power
source and amount of idle time before entering the Suspend state.
See the section titled "Set the Display Backlight Timer" in the previous section
"Quick Start."
Touch Screen Calibration
If the MX5 is not responding properly to pen touch taps, the touch screen may
need to be recalibrated. Contact your System Administrator for assistance.
Pocket PC 2000 To recalibrate the screen, tap the Windows icon | Settings |
System | Align Screen. To start, tap Align Screen.
Pocket PC 2002 To recalibrate the screen, tap the Windows icon | Settings |
System | Screen. To start, tap Align Screen.
Follow the instructions on the screen and tap OK to save the new calibration
settings.