IBM MX5 - Manual (Page 31)

Appendix A Key Maps
Keypad
Remember :
The Orange (on the left) and Blue (on the right) keys are “2
nd function” keys.
Ctrl, Alt, Shft, Blue and Orange keys are “sticky keys”. They do not need to be
held down before pressing the next (or desired) key. It is valid to use combined
modifiers on specific keys.
Note: This key mapping is used on hand held computers that are NOT running
an LXE Terminal Emulator.
When using a sequence of keys that includes the Orange or Blue keys, press the
color key first then the rest of the key sequence.
Alphabetic keys default to lower case letters. Press the Shft key, then the
alphabetic key for an uppercase letter.
Note: When the computer boots, the default condition of Caps (or CapsLock) is
Off. The Caps (or CapsLock) condition can be toggled with Blue plus Tab
key sequence.
Press These Keys and Then … To Get This
Key / Function Blue Orange Shft
Press This Key
Power /
Suspend
Power
Volume Adjust Blue V
Backlight
Toggle for
Display and
Keypad
Blue Right Scan Key
Adjust
Backlight
Brightness
Down *
Orange 7
* Backlight must be toggled On. Once the backlight is off, the Blue key / Right
Scan key sequence toggles the backlight on and at it’s brightest intensity.
Press These Keys and Then … To Get This
Key / Function Blue Orange Shft
Press This Key
Blue Mode Blue