Impex GS 99 - Manual (Page 13)

STEP 6 (See Diagram 6)
A.) Attach the Front Press Base (#10) to the Right Base Frame (#1). Secure it with one M10 x 9
¼” Front Press Axle (#49), two Ø ¾” Washers (#99), and two M10 Aircraft Nuts (#96).
B.) Attach two Front Press Frames (#13) onto the bracket on the Front Press Base. Secure them
to the Front Press Base with four M10 x 2 ½” Carriage Bolts (#85), Ø ¾” Washers (#99), and
M10 Aircraft Nuts (#96).
C.) Securely tighten all Nuts and Bolts previously installed.
DIAGRAM 6
12