Iiyama L400W - Manual (Page 20)

Approx. 9300K
Menu : 1
(Video)
Adjustment Item Problem / Option Button to Press
Too dark
Too bright
Brightness * 1
Contrast * 1
Too dull
Too intense
Color
Hue
Sharpness
Too soft
Too sharp
Return to Menu Highlight “Menu : 1” again.
Direct
Direct
Too weak
Too strong
Purplish
Greenish
Color Temp.
N T S C
H : 1 6 K H z V : 6 0 H z
M e n u : 1
Color1
User
Color2 Approx. 7500K
or
or
or
or
or
APPENDIX B
Optional Video Input
This OSD Menu is available only when the optional video adapter is installed in the monitor.
Video input is not selected automatically from Analog or Digital input. Switch to video input by “Signal Select” on OSD Menu or the Input Button.
Under the power management mode, “Signal Select” page is displayed directly by pressing the Menu Button when the Menu is not displayed.
Red
or Green
Blue
Too dull
Too intense
You can skip the Menu pages and display an
adjustment scale directly by using the
following button operations.
l Brightness
Press the Brightness Button on the monitor
or the Remote Control when the Menu is not
displayed.
l Contrast
Press the Contrast Button on the monitor or
the Remote Control when the Menu is not
displayed.
SWITCHING BRIGHTNESS / CONTRAST
ADJUSTMENT
To switch between Brightness and Contrast
adjustments, press the Menu Button within
10 seconds after pressing the Brightness
Button or the Contrast Button during the
direct adjustments above.
NOTE
Direct
* 1 Adjust the Brightness and Contrast so
that the picture is displayed naturally in
Video Input mode.
18 APPENDIX B