Int'l Wireless E2 - Manual (Page 143)

Tungsten™ E2 Handheld 134
Manufacturer’s Address: 400 N. McCarthy Blvd.
Milpitas, 95035-5112
Meets the following European Council Directives:
• 89/336/EEC (EMC Directive)
• 99/5/EC (R&TTE Directive)
• 73/23/EEC (Low Voltage Directive).
Conforms with the following specifications:
• EN 55024: 1998 (Emissions & Immunity)
• EN55022:1998, CISPR 22 1997, Class B Radiated and Conducted Emissions
• IEC 61000-4-2, A1 1998-01, ESD Immunity, 4kV Contact, and 8kV Air Discharge
• IEC 61000-4-3: 1995 RF Immunity, 80-1000MHz, 3V/M, 1kHz, 80% A.M.
• ENV 50204:1996, RF Immunity, 895-905MHz, 3V/m, 200Hz, 50% AM
• IEC 61000-4-4: 1995 EFT Immunity, 1kV on AC port, 5/50nSec, 5kHs Rep. Freq.
• IEC 61000-4-5: 1995 Surge Immunity, 1.2/50uSec, 2kV(peak), Common Mode, 1kV(peak) Differential Mode
• EN61000-4-6:1996, Conducted Immunity, 150kHz-80MHz, 3V RMS, 1kHz, 80% AM
• IEC 61000-4-11: 1994, 100% Voltage Dip 0.5 period, 30% Dip 25 periods and >100% Dip 250 periods
Authorized palmOne Representative: David Waitt
palmOne Compliance Engineer
Date: April 18, 2005
Battery Warning
Do not mutilate, puncture, or dispose of batteries in fire. The batteries can burst or explode, releasing
hazardous chemicals. Discard used batteries according to the manufacturer’s instructions and in accordance
with your local regulations.
Varning
Eksplosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ som
rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens instruktion.