Installing remote control batteries, Using the remote control – Insignia NS-A3111 User Manual

Page 7

Advertising
background image

7

Insignia NS-A3111 DVD Executive Shelf System

www.insignia-products.com

Installing remote control batteries

To install the remote control batteries:
1
Remove the battery cover.

2 Insert two AAA batteries into the battery

compartment. Make sure that you match the
+ and – symbols on the batteries with the +
and – symbols in the battery compartment.

3 Replace the cover.

Using the remote control

To use the remote control:

Point the remote control directly at your shelf
system, within a 60° angle horizontally (30°
to either side), and within 30° vertically of the
remote control sensor on the front of your
shelf system and within approximately 20 feet
(6 m) of your shelf system.

7

or

Press to skip backward or forward to
the previous or next chapter or track.

8

BOOKMARK

Press to open the Bookmark menu.

9

V-SELECT

Press to switch between video outputs.

10

ZOOM/CLEAR

In playback mode, press to select a diff
erent zooming size while playing a
video.
In menu mode, press to clear the
information you entered in a setup
menu.

11

ANGLE/PBC

In playback mode, press to toggle
between different angles to view (if
available on the disc).
Press to turn PBC on or off on a VCD
disc.

12

SOURCE

Press to cycle between Disc/USB, FM,
AM, and AUX modes.

13

ROTATE

Press to rotate the picture.

14

CLOCK

In Standby mode, press and hold to
start real time clock setup.

15

SLEEP

Press to activate a sleep timer for your
DVD shelf system to go into standby
mode automatically.

16

OPEN/CLOSE

Press to open and close the disc tray.

17

VOL +/VOL –

Press to increase or decrease the
volume.

18

MUTE

Press to mute the sound. Press again
to restore the sound.

19

INFO

Press to display current information
about a disc during playback.

20

(Pause)

Press once to pause playback or
recording. Press repeatedly to advance
frame by frame.

21

(Play)

Press to start playback.

22

SETUP/EXIT

Press to enter or exit the System Setup
menu.

23

OK

Press to enter or select a value in a
menu and setup navigation.

24

/

In playback mode, press to fast reverse
or fast forward the DVD or CD. Press
repeatedly to step through the fast
reverse or fast forward speeds.
In Radio mode, press to start autoscan
up or down.

25

SUBTITLE

Press to select a subtitle language, if
available.

26

AUDIO/FM ST

In playback mode, press to change to a
different audio stream.
In radio mode, press to select Mono or
Stereo.

#

Button

Function

27

DIMMER

Press to dim or brighten the front panel
display light.

28

GOTO

Press to start playback at a specific
point on a DVD, CD, VCD, or SVCD
disc.

29

PLAYMODE

Press to display the playmode menu to
select a different play mode.

30

A-B

Press to set up repeat playback or to
clear repeat playback.

31

EX BASS

Press to turn Ex Bass on or off.

32

EQ

Press to select a preset EQ mode.
Selections include FLAT, ROCK, POP,
CLASSIC, and JAZZ.

Notes

Do not mix batteries of different types.

Do not mix old and new batteries.

Remove batteries when the charge is depleted.

Battery chemicals can cause a rash. If the
batteries leak, clean the battery compartment
with a cloth. If chemicals touch your skin, wash
immediately.

If the remote control is not going to be used for
an extended period of time, remove the
batteries.

Caution

Do not expose the remote control to liquids, direct
sunlight, or shock. Do not mix batteries of different
types.

#

Button

Function

Advertising