iRobot Roomba Discovery Series 430 - Manual (Page 11)

For more detailed information, visit: www.irobot.com
Remote Control
(optional accessory)
The Remote Control lets you conveniently control Roomba’s functions.
You can use it to turn Roomba on and off, and steer it around your
room without bending down. It also gives you remote access to these
commands:
Directional
Buttons
SPOT
Button
CLEAN/Power
Button
. . .
TIP: Check that there is a direct line of sight from the Remote Control to
Roomba and that the remote is pointed at Roomba.
The Remote Control and Virtual Walls operate using an invisible infrared
beam. If they are all used in the same area, Roomba may see multiple
infrared signals and will not operate. The Remote WILL NOT work when
Roomba is near Virtual Walls.
Before using your remote for the first time, install 2 AA batteries (not
included).
SPOT Roomba spirals approximately three
feet in diameter and then spirals back
to where it started, intensely cleaning a
local area.
CLEAN Roomba automatically calculates the
room size and adjusts its cleaning time
appropriately.
. . . Models 430-519 Roomba enters Spot
mode.
Models 520-599 Roomba attempts to
Dock on the Home
Base, if present.
Models 600+ Roomba enters Max
mode and cleans
until the battery is
discharged.
. . .
Button