Inter-Tel AXXESS 8662 User Manual
Page 59
MOVING ON
49
Axxess
®
Model 8662 Phone User Guide – Axxess IP Mode
To store a number in a speed-dial location:
1.
With the handset in the cradle, dial
.
2.
Dial the speed-dial location (0-9) you want to program.
3.
Enter the desired name for the speed-dial number, as described below:
• Alphanumeric mode (Message button and lamp lit): Press the dialpad buttons
to enter the desired characters. (Refer to the chart on
of times a button is pressed determines which character is entered. For exam-
ple, 533266 would enter “JEAN.” When adjoining characters are located
under the same button, press
once to advance to the next character.
For example, 66
6667776 would enter “NORM.” (Note that letters
correspond to the letters printed on dialpad buttons 2-9.) Press
twice
to leave a space. Press
if you need to backspace.
• Press the ACCEPT menu button to save the name.
4.
Dial the extension number or telephone number to be stored, as described below:
• Numeric mode (Message button and lamp unlit): Enter the number. Press
for a hyphen (-),
for a colon (:),
to leave a space, or
to
backspace.
If your number includes an asterisk, pound, hookflash, or pause, use the
menu buttons to enter the special character.
• Press the ACCEPT menu button on the display to save the number.
TIP:
To dial outside telephone numbers without first selecting an outgoing line,
enter the Outgoing Call access code (default is
) before the outside telephone
number.
To erase a Station Speed-Dial name and/or number:
1.
With the handset in the cradle, dial
.
2.
Dial the desired location code (0-9) or press the desired Station Speed-Dial but-
ton.
3.
Press
repeatedly until the name is erased.
4.
Press
or
the
ACCEPT menu button to continue.
5.
Press
repeatedly until the number is erased.
6.
Press
or
the
ACCEPT menu button to exit.
3
8
3
FWD
FWD
FWD
MUTE
#
FWD
MUTE
8
3
8
3
MUTE
#
MUTE
#