IDEAL INDUSTRIES Dual View Thermal Imaging Camera HeatSeeker 160 - Manual (Page 16)

#61-846
ND-7521-1 Page 16 of 25
5.4. Audio settings
Imager sounds
Select “Off” to mute all audible outputs.
Voice annotation
Select “Individual” to add a voice message to each saved image.
Select “Session” to add a voice message at the start of a set of images (A
session ends when the imager is switched off).
Select “Combined” to add a common voice message at the start of a set of
images and add additional comments for each image.
Voice playback
Select “speaker” or “headset” for the desired method of audible outputs.
Volume
Select the volume of the audible outputs from 1 to 9.
If “Session” or “Combined” is selected the voice message is recorded before exiting
the audio settings menu by pressing Function Key 3. Recording is stopped by
pressing Function Key 3 again. Function Key 2 can be used to play back the
recorded message. Function Key 3 can be used to re-record if necessary.