Stability stability warnings, Warning – Invacare F-6S User Manual

Page 6

Advertising
background image

6

PROCEDURE 1

G

E

N

E

R
A

L

GENERAL GUIDELINES

This Procedure includes the following:

Stability

Operating Information

Tire Pressure

Weight Training

Weight Limitation

Safety/Handling of Wheelchairs

Footrest Position

Seat Angle

Back Angle

Seating System

Caster Size

Caster Position

Rear Wheel Size

Rear Wheel Position

Anti-T

ippers

User Condition

NOTE: When changes to the left hand column occur, follow across the chart
and refer to the

procedure to maintain the proper stability, safety and han-

dling of the wheelchair.

NOTE: Additional adjustments may be needed according to the wheelchair
type. Refer to the wheelchair owner's manual for these procedures.

G

U

I

D

E
L

I

N

E
S

Footrest Position

Seat Angle

Back Angle

Seating System/Upholstery

Caster Size

Caster Position

Rear Wheel Size

Rear Wheel Position

Anti-Tippers

User Condition

STABILITY

STABILITY WARNINGS

The position of the footrest, seat angle, back angle, seating system/upholstery, caster size and position,
rear wheel size and position, anti-tippers, as well as the user condition directly relate to the stability of the
wheelchair. Any change to one (1) or any combination of the ten (10) may cause the wheelchair to
decrease in stability. EXTREME care MUST be taken when changing the stability of the wheelchair.

To maintain maximum stability, the rear wheels should be left in the factory setting. Moving the rear
wheels forward causes the wheelchair to decrease in stability.

ALWAYS ensure stability BEFORE moving the rear wheels forward. TEST wheelchair BEFORE it is occupied
by the end user to ensure safety.

OPERATING INFORMATION

WARNING

To determine and establish your particular safety limits, practice bending, reaching and transferring
activities in several combinations in the presence of a qualified health professional BEFORE attempting
active use of the wheelchair.

Advertising
This manual is related to the following products: